press brake was invetned in europe in year 1875 and fisrt made in Holland and Germany then in Japan  

1

Synchronous system: The machine consists of a mechanical synchronization mechanism composed of a twist axis, swing arm, and a constant joint bearing of the car. The performance is stable and reliable, and the synchronization accuracy is high. The mechanical block is adjusted by the motor, and the CNC system controls the value.

2
Plock part: use hydraulic transmission. The slider part is composed of fine -tuning structures, oil cylinders, and mechanical blocks. The left and right oil cylinders of the bending machine are fixed on the rack, and the piston driving the slider up and down motion through the hydraulic pressure. The mechanical block is controlled by the CNC system to control the value.


3
The material blocking mechanism: The gear is driven by motor. The paste distance is driving the two rods to move simultaneously, and the CNC system controls the block size.

4
Workbether: Motors of the button box, so that the bending motor motors drive the front and back of the material to move, and the distance between the CNC system is controlled. The number of speed dolls is 0.01 mm.